Checking the server settings of your Axis video unit

If the state of the video unit does not change from Waiting for connection to Connected when adding your Axis video unit in Stratocast™, you can check the server settings of your Axis video unit.

1. Open the video unit’s web page and log on. You must be connected to your client's network to be able to access the video unit's web page.
   Important: For the duration that your video unit is enrolled in Stratocast™, use your video unit's owner authentication key (OAK) as the password to log on to your video unit's Axis web page. If your OAK contains hyphens, omit them when entering your password.
2. Click Setup > System Options > Advanced > Plain Config .
3. From the Select group drop-down list, select RemoteService and then click Select group.
   • If a Stratocast™xxx.cloudapp.net address appears in the Server list field, do the following:
     1. Delete the video unit from Stratocast™.
        CAUTION: If you delete a camera that is connected to a video encoder that has multiple cameras connected to it, all other cameras that are connected to that same video encoder are also deleted automatically.
     2. Wait ten minutes and try adding the video unit again. If problem persists, contact Stratocast™ support.
   • If a Stratocast™xxx.cloudapp.net address does not appear in the Server list field, restore the server settings of your Axis video unit.