Home
Video units
Searching for devices
If the list of devices is long and it is difficult to find a particular camera or NAS volume, you can search for the device name to find what you are looking for quickly.

Preface
Getting started
Release notes
Check out what's new in the latest release of Stratocast
Integrators
Client accounts
Video units
- Video encoders
  A video encoder is a video unit that converts an analog video source to a digital format by using a standard compression algorithm, such as H.264, MPEG-4, MPEG-2, or M-JPEG. Using a video encoder with multi-channel inputs, you can digitize the analog video of multiple cameras at the same time.
- Axis video units
- Bosch video units
- Hanwha video units
- i-PRO video units
- Mobotix video units
- Vivotek video units
- Supported features for Stratocast Control Protocol (SCP) cameras
  Use the following information to understand the common features that are supported for SCP cameras in Stratocast™.
- Device states
  Once a video unit or NAS volume has been added, you can see its real-time status on the Devices page.
- Searching for devices
  If the list of devices is long and it is difficult to find a particular camera or NAS volume, you can search for the device name to find what you are looking for quickly.
- Modifying camera settings
  After your device has been added, you can modify the settings of each enrolled device individually.
- Configuring your camera's motion detection
  To control how your camera detects motion and avoid false motion detections, you can configure your camera's motion detection by adjusting the default levels of three basic settings.
- Inserting memory cards into your video units
  If you are using a video unit that supports edge recording, you must insert a memory card into your video unit before you can record and store video directly on your video unit.
- Formatting memory cards on your video units
  If you are using your video unit’s memory card for the first time, or the write speed of the memory card seems slow, you can format the memory card before recording video on your edge recording video unit.
- Restarting cameras
  If you are experiencing problems with your camera and it is not responding, you can restart your camera without affecting its current settings.
- Deleting cameras
  If a device is no longer required or is in an error state, you can delete it so that it is permanently removed from the client’s list of devices.
- Replacing cameras
  If you need to replace or upgrade a camera in an existing Stratocast™ account, you can replace the camera and keep the same camera name, plan, and video quality settings. When replacing cameras, you do not incur additional charges.
Network attached storage
Basic monitoring
Bookmarks
Video export
Video recording
Health monitoring
Account management
Additional resources
Glossary

Searching for devices

2019-03-06

If the list of devices is long and it is difficult to find a particular camera or NAS volume, you can search for the device name to find what you are looking for quickly.

What you should know

You can only search for a device by name. Also, you can view the complete list of your client's cameras by clicking Configurations > Cameras in your client's Stratocast™ web portal.

Procedure

Click Clients and then, from the Number of devices column, click the client account that the device is added to.
In the Search box, enter the name or one or more sequential letters within the device name that you are searching for, and then click .
The device names that correspond to your search criteria are displayed.
To display the complete list again, clear the Search box () and press Enter on your keyboard.

Example

You have a long list of cameras and NAS volumes and you are searching for the camera name CafeteriaCam1. If you are unsure of its spelling, you can type C A and press Enter. All camera names that contain the letter sequence C A are displayed.

Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages.